Skip to content
ChainsawGo logo — chainsaw icon with the ChainsawGo wordmark
  • Home
  • About UsExpand
    • Contact Us
  • Cordless Chainsaws
  • Gas Chainsaws
  • Chainsaw Parts
  • Safety Gear
  • Chains & Bars
  • Free Tools
ChainsawGo logo — chainsaw icon with the ChainsawGo wordmark
Free finder

Chainsaw File Size Finder

Pick your chain pitch or type the number stamped on your chain to see the round file size STIHL and Oregon publish for it.

  • Free
  • No sign-up
  • Runs in your browser
Estimates only · data checked October 2026 · About this data

Chainsaws can cause serious injury. This tool is a general reference only. Always check the file size and sharpening instructions in your chain and saw manufacturer's manual, wear appropriate protective gear, and have the chain professionally sharpened if you are unsure.

Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.

Quick answer

A chainsaw chain file size chart matches chain pitch to round file diameter: STIHL lists 4.0 mm for 1/4″, 4.8 mm for .325″, 4.0 mm for 3/8″ Picco, 5.2 mm for 3/8″ and 5.5 mm for .404″. Oregon’s listed sizes vary by chain family. Pick your pitch or chain number below.

How to use the chainsaw file size finder

  1. Choose your chain pitch: 1/4″, .325″, 3/8″ Low Profile, 3/8″ or .404″.
  2. Not sure of the pitch? Leave the buttons alone and type the number stamped on your chain instead. The tool accepts Oregon chain numbers (for example 72 or 91) and the single STIHL depth-gauge code digit. It only recognises numbers from the manufacturers’ own tables and never guesses.
  3. Press Find file size. You get the STIHL file diameter, the Oregon file sizes listed in the cited manual for the covered chain families, and the depth-gauge settings.
  4. Read the note above the result. STIHL gives its sizes in millimeters and Oregon mostly in fractions of an inch, so use the column for your chain’s brand. Where Oregon lists different files for different chain families, the size printed on your chain box or in your chain manufacturer’s guide decides which applies. For 1/4″ Picco, only STIHL data is listed.
  5. Press Print cheat sheet to print the chart below with your pitch’s row highlighted, together with its sources and the safety note. The form controls are left off the printout.

Chainsaw chain file size chart: how the lookup works

The tool does no arithmetic. It looks up your pitch in two manufacturer charts and shows each value in the unit the manufacturer used. Where we add the other unit, it was converted once at 1 in = 25.4 mm and is marked “converted”. For example, 7/32″ works out to 5.56 mm. The two charts are kept side by side and never merged or averaged. STIHL and Oregon do not always agree, and in the cited Oregon manual some pitches have more than one file size depending on the chain family.

PitchSTIHL (brochure)Oregon (manual / file packs)
1/4″4.0 mm5/32″ (3.97 mm converted) – 25AP
1/4″ Picco3.2 mmNot listed by Oregon
.325″4.8 mm3/16″ (4.76 mm converted) – 20BP/21BP/22BP, 20LP/21LP/22LP, 95VP; 4.5 mm – 33LG/34LG/35LG, 33SL/34SL/35SL
3/8″ Low Profile (STIHL 3/8″ Picco)4.0 mm5/32″ (3.97 mm converted) – 91VG, 91VS, 91P; 4.5 mm – 90SG (.043″ gauge)
3/8″5.2 mm7/32″ (5.56 mm converted) – 72V/73V/75V, 72LP/73LP/75LP, 72JG/LG, S-70 72AP/DP; 3/16″ (4.76 mm converted) – 72DG/DJ and 72SG (both recently obsoleted)
.404″5.5 mm7/32″ (5.56 mm converted) – 26/27, 58J/59J/58L/59L, 50L/51L/52L
Sources: STIHL “Sharpening STIHL Saw Chains” brochure; Oregon Maintenance & Safety Manual pp. 35-58 (covered chain families only). Checked October 2026. Your chain’s packaging or manufacturer guide decides which size applies.

Oregon’s retail file packs confirm the same split. The 5/32″ (4.0 mm) pack is sold for 3/8″ Low Profile and 1/4″ chain. Oregon’s file guide pairs 3/16″ with .325″ chain and 7/32″ with 3/8″ and .404″ chain.

Filing angles, depth gauges and identifying your pitch

File size is only part of a good sharpen. STIHL tells you to hold the file at 90° to the guide bar with one quarter of its diameter above the top plate. STIHL also says its chains are generally filed to a 30° angle. Oregon gives the top-plate angle for each chain family covered here:

  • 30° for 25AP, 20BP, 95VP, 91VG/91VS/91P and 90SG.
  • 25° for 20LP, 33LG/33SL, 72V, 72LP, 72JG/LG and 58J/L.
  • 35° for S-70 72AP/DP and 26/27.

For any other family, check your chain’s packaging or manufacturer guide.

PitchSTIHL depth-gauge setting
1/4″0.65 mm (0.026″)
1/4″ Picco0.45 mm (0.018″)
.325″0.65 mm (0.026″)
3/8″0.65 mm (0.026″)
3/8″ Picco0.65 mm (0.026″)
.404″0.80 mm (0.031″)
Source: STIHL “Sharpening STIHL Saw Chains” brochure. Oregon lists .025″ for most of the chain families covered here and .030″ for 72DG/72SG and 26/27.

STIHL warns that kickback tendency increases if the depth gauges are too low, so do not file them below the published setting.

Finding your pitch. Oregon defines chain pitch as the distance between any three consecutive rivets, divided by two. You can also read the chain itself. On STIHL chain, the depth-gauge code digit maps to pitch: 1 = 1/4″, 2 = .325″, 3 = 3/8″, 4 = .404″, 6 = 3/8″ Picco and 7 = 1/4″ Picco. On Oregon chain, the stamped number maps to pitch and gauge in Oregon’s manual. For example, 72 is 3/8″ with a .050″ gauge, 91 is 3/8″ Low Profile with a .050″ gauge, and 20 is .325″ with a .050″ gauge. The tool recognises only the chain numbers in that table.

Methodology & sources

Every file size, angle and depth-gauge figure on this page was copied from STIHL and Oregon documents and checked against both in October 2026. Where they disagree, both values are shown. Conversions use 1 in = 25.4 mm and are labelled. The Oregon column covers the chain families named in the cited manual pages, not every Oregon chain. The chart does not cover 3/4″ pitch, harvester chains, ripping chains or square-ground chains, and it does not replace your manufacturer’s instructions.

  • STIHL – Sharpening STIHL Saw Chains (file sizes, filing angle, depth gauges, code digits)
  • Oregon Maintenance & Safety Manual – pitch and chain numbers
  • Oregon Maintenance & Safety Manual – chain pages: part 3, part 4, part 5
  • Oregon 5/32 in. round file pack (23577)
  • Oregon chainsaw file guide (25896)
  • Inch – definition (1 in = 25.4 mm)

Last updated: October 2026

FAQ

What size file do I need for a 3/8″ chainsaw chain?

STIHL lists a 5.2 mm round file for standard 3/8″ chain. In the cited Oregon manual, 7/32″ applies to the 72V, 72LP, 72JG/LG and 72AP/DP families and 3/16″ to the 72DG/DJ and 72SG families. 3/8″ Low Profile chain is different: STIHL lists 4.0 mm for its 3/8″ Picco, and Oregon lists 5/32″ (91VG, 91VS, 91P) or 4.5 mm (90SG).

What file size is used for .325″ chain?

STIHL lists 4.8 mm. Oregon lists 3/16″ for its 20BP/LP, 21BP/LP, 22BP/LP and 95VP chains and 4.5 mm for the 33/34/35 LG and SL families, so check the size printed on your chain box.

Why do STIHL and Oregon list different file sizes for the same pitch?

Each manufacturer publishes sizes for its own chain families in its own unit: STIHL in millimeters, Oregon mostly in fractions of an inch. This chart shows both values side by side and does not pick one. Use the size printed for your chain family or on the chain box.

How do I find my chain pitch?

Oregon defines pitch as the distance between any three consecutive rivets, divided by two. You can also read the number stamped on the chain: Oregon chain numbers and the STIHL depth-gauge code digit both map to a pitch.

What depth-gauge setting should I use?

STIHL lists 0.65 mm (0.026″) for 1/4″, .325″, 3/8″ and 3/8″ Picco, 0.45 mm (0.018″) for 1/4″ Picco and 0.80 mm (0.031″) for .404″. Oregon lists .025″ for most of the chain families covered here and .030″ for some, including 72DG/72SG and 26/27. STIHL warns that kickback tendency increases if depth gauges are too low.

Related guides

  • Types of Chainsaw Chains: Full Chisel, Semi-Chisel, Low-Profile and Ripping
  • How to Measure a Chainsaw Chain: Pitch, Gauge and Drive Links
  • How Often to Replace a Chainsaw Chain? Signs It’s Worn Out
  • How to Count Drive Links on a Chainsaw Chain Without Mistakes
  • Chainsaw Chain Size Chart by Bar Length, Pitch and Saw Model
  • How to Store Chainsaw Batteries in Winter to Protect Capacity

Chainsaws can cause serious injury. This tool is a general reference only. Always check the file size and sharpening instructions in your chain and saw manufacturer’s manual, wear appropriate protective gear, and have the chain professionally sharpened if you are unsure.

More free tools

Battery Chainsaw Runtime Estimator

Estimate battery chainsaw runtime from battery voltage, amp-hours, rated watts and duty cycle, with an optional corded-saw energy comparison.

Battery vs Gas Chainsaw Cost-of-Ownership Calculator

Compare the total cost of a gas and a battery chainsaw over the years with your own fuel, power and usage numbers, and find the break-even point.

Chainsaw Bar, Chain & Sprocket Fitment Chart

Look up bar lengths, chain pitch, gauge, drive links and sprocket for listed Husqvarna and STIHL saws, or find saws by pitch and gauge.

See all free tools (9) →

  • Home
  • About Us
  • Contact Us
  • HTML SITEMAP
  • Privacy Policy
  • Terms of Service
  • Affiliate Disclaimer
  • How We Research

Please keep in mind that we may receive commissions when you click our links and make purchases. However, this does not sway our reviews and comparisons. We try our best to keep things unbiased, in order to help you make the best choice. As Amazon Associate, we earn from qualifying purchases.

© 2026 ChainsawGo | All Rights Reserved.

Scroll to top
  • Home
  • About Us
    • Contact Us
  • Cordless Chainsaws
  • Gas Chainsaws
  • Chainsaw Parts
  • Safety Gear
  • Chains & Bars
  • Free Tools
Search