Chainsaw Chain Speed Calculator
Turn RPM, drive sprocket teeth and chain pitch into chain speed in ft/s, m/s, mph or km/h, and compare 7- vs 8-tooth sprockets.
- Free
- No sign-up
- Runs in your browser
Estimates only · data checked October 2026 · About this data
Results are theoretical chain speeds from RPM, sprocket teeth and pitch; speed under load may be lower if the engine or motor runs below the entered RPM. Never exceed your saw's rated RPM and follow the manufacturer's manual.
Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.
Quick answer
A chainsaw chain speed calculator turns engine RPM, drive sprocket teeth and chain pitch into linear chain speed: RPM ÷ 60 × teeth × 2 × pitch. For example, 9,000 rpm on a 7-tooth 3/8″ sprocket gives about 65.6 ft/s (20.0 m/s). Enter your numbers below and compare sprocket sizes instantly.
How to use the chainsaw chain speed calculator
- Enter the RPM. Type the engine or motor speed you cut at, or the rated / maximum-power RPM from your owner’s manual. For a few Husqvarna and STIHL models you can pick the manual’s max-power RPM from the preset list.
- Enter the drive sprocket teeth. Most saws use a 6-, 7- or 8-tooth sprocket; the count is often stamped on the sprocket or rim.
- Choose the chain pitch. Pick 1/4″, .325″, 3/8″, 3/8″ Low Profile or .404″. If you want to match STIHL’s own published figures, choose the STIHL 9.32 mm option for 3/8″.
- Optionally add a comparison sprocket to see how much a swap (for example 7 to 8 teeth) changes chain speed.
- Pick your units (ft/s, m/s, mph or km/h) and press Calculate chain speed. The result shows every unit plus a table of chain speed for other sprocket sizes at the same RPM.
The chain speed formula explained
Chain pitch is the distance between three consecutive rivets divided by two. Because a drive link and a tie strap alternate along the chain, each tooth on the drive sprocket pulls the chain forward two pitch lengths. That gives a purely mechanical relationship:
Chain speed (in/s) = RPM ÷ 60 × sprocket teeth × 2 × pitch (in)
Divide inches per second by 12 to get feet per second, or multiply by 0.0254 (1 in = 25.4 mm exactly) to get meters per second. From there, ft/s × 3,600 ÷ 5,280 gives mph and m/s × 3.6 gives km/h.
| RPM | Teeth | Pitch | ft/s | m/s |
|---|---|---|---|---|
| 9,000 | 7 | .325″ (0.325 in) | 56.9 | 17.34 |
| 9,000 | 7 | 3/8″ (0.375 in) | 65.6 | 20.00 |
| 9,000 | 8 | 3/8″ (0.375 in) | 75.0 | 22.86 |
| 10,000 | 7 | .325″ (0.325 in) | 63.2 | 19.26 |
Worked through for the second row: 9,000 ÷ 60 = 150 revolutions per second; 150 × 7 teeth × 2 = 2,100 pitch lengths per second; 2,100 × 0.375 in = 787.5 in/s, which is 65.6 ft/s or 20.0 m/s.
Sprocket swaps, pitch and manufacturer figures
Because chain speed is directly proportional to tooth count, changing the sprocket changes speed by the same percentage. Going from 7 to 8 teeth adds about 14.3% at the same RPM; going from 7 to 6 removes about 14.3%. The formula assumes RPM stays the same, though. A larger sprocket puts more load on the engine or motor, and whether it can hold that RPM in the cut is not something the formula can predict.
Pitch matters in the same proportional way. A 3/8″ chain on the same sprocket and RPM runs about 15% faster than a .325″ chain, simply because each link is longer. Note that STIHL lists 3/8″ as 9.32 mm, while the nominal 0.375 in equals 9.525 mm, so STIHL’s published chain speeds for 3/8″ chain are slightly lower than a nominal-pitch calculation.
Owner’s manuals quote chain speed at different reference RPMs. STIHL and Husqvarna give a figure at maximum-power speed, Husqvarna’s 435/440 manual also quotes 133% of that speed, and STIHL’s ISO 11681 “max chain speed” figures are at a higher RPM than maximum power. When you compare saws, make sure you compare figures taken at the same kind of RPM.
Methodology & sources
The calculator uses the physical relationship between sprocket rotation and chain travel together with nominal pitch dimensions. We checked it against chain speeds published in manufacturer manuals: it reproduces STIHL MS 250 figures (19.3 m/s with .325″, 21.7 m/s with 3/8″ P at 9.32 mm) to within 0.05 m/s and Husqvarna 435/440, 445/450 and 455/460 figures to within about 1%, since Husqvarna rounds. RPM presets are only the max-power speeds printed in those manuals.
- Oregon Maintenance & Safety Manual: pitch definition and nominal pitch sizes
- STIHL: Sharpening STIHL Saw Chains: STIHL metric pitch values
- STIHL MS 230/MS 250 instruction manual: max-power RPM and chain speeds
- Husqvarna 445/450 operator’s manual
- Husqvarna 455/460 operator’s manual
- Husqvarna 435/440 operator’s manual
- Inch (Wikipedia): 1 in = 25.4 mm exactly
Last updated: October 2026
FAQ
How do you calculate chainsaw chain speed?
Multiply revolutions per second (RPM ÷ 60) by the number of drive sprocket teeth, by 2, and by the chain pitch. Each sprocket tooth moves the chain two pitch lengths, so a 7-tooth .325″ sprocket at 9,000 rpm gives 682.5 in/s, or about 56.9 ft/s (17.3 m/s).
Does an 8-tooth sprocket make the chain faster than a 7-tooth?
Yes. At the same RPM, chain speed rises in direct proportion to tooth count, so going from 7 to 8 teeth increases chain speed by about 14.3%. Whether the engine can hold that RPM under load with the larger sprocket is a separate question the formula does not answer.
Why does my result differ slightly from the owner’s manual?
Manufacturers round their published figures, and some use a slightly different pitch value: STIHL lists 3/8″ as 9.32 mm, while the nominal 0.375 in is 9.525 mm. Using the same RPM and pitch, the formula reproduces STIHL’s figures to within 0.05 m/s and Husqvarna’s within about 1%.
Which RPM should I enter?
Use the RPM you actually cut at, or the manufacturer’s rated or maximum-power RPM from the manual. Some manuals also quote chain speed at a higher RPM (for example 133% of maximum-power speed or the ISO 11681 maximum), so compare like with like.
Related guides
- Are Battery Chainsaws as Powerful as Gas? Cutting Speed and Torque Compared
- How to Measure a Chainsaw Chain: Pitch, Gauge and Drive Links
- How Often to Replace a Chainsaw Chain? Signs It’s Worn Out
- How to Count Drive Links on a Chainsaw Chain Without Mistakes
- Types of Chainsaw Chains: Full Chisel, Semi-Chisel, Low-Profile and Ripping
- Chainsaw Chain Size Chart by Bar Length, Pitch and Saw Model
More free tools
Battery Chainsaw Runtime Estimator
Estimate battery chainsaw runtime from battery voltage, amp-hours, rated watts and duty cycle, with an optional corded-saw energy comparison.
Battery vs Gas Chainsaw Cost-of-Ownership Calculator
Compare the total cost of a gas and a battery chainsaw over the years with your own fuel, power and usage numbers, and find the break-even point.
Chainsaw Bar, Chain & Sprocket Fitment Chart
Look up bar lengths, chain pitch, gauge, drive links and sprocket for listed Husqvarna and STIHL saws, or find saws by pitch and gauge.
