Skip to content
ChainsawGo logo — chainsaw icon with the ChainsawGo wordmark
  • Home
  • About UsExpand
    • Contact Us
  • Cordless Chainsaws
  • Gas Chainsaws
  • Chainsaw Parts
  • Safety Gear
  • Chains & Bars
  • Free Tools
ChainsawGo logo — chainsaw icon with the ChainsawGo wordmark
Free calculator

Chainsaw Chaps Size Calculator

Enter your belt-to-boot length, waist and chap style to see the matching size in STIHL, Labonville and Husqvarna size tables.

  • Free
  • No sign-up
  • Runs in your browser
Estimates only · data checked October 2026 · About this data

Last updated: October 2026. Sizing estimate only. Check the manufacturer’s current chart before buying.

Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.

Quick answer

To size chainsaw chaps, measure from your belt line down to the top of your boot, then choose the smallest listed chap length that is at least that long. Enter your measurement below to see the matching size in STIHL, Labonville and Husqvarna tables side by side.

How to use the chainsaw chaps size calculator

  1. Pick inches or centimeters. If you switch units later, the calculator converts the numbers you have already typed.
  2. Measure from the top of your belt down to the top of your boot, as shown in the diagram next to the inputs. STIHL says its chaps are measured by overall length from the waist down. Labonville says to measure “from the top of your belt down to the top of your foot”. Husqvarna describes overall length as “from waist to ankle”.
  3. Enter your waist if you want it checked. It is optional and is only compared where a manufacturer lists a waist range.
  4. Choose apron or wrap chaps. There is no default, and the tool never swaps in the other style for you.
  5. Press Find my size. You get one result per transcribed table, each with a link to the manufacturer page it came from and the date it was transcribed, plus a summary line that either says the tables agree or shows the spread between them.

STIHL adds a fit check. Chaps should cover the top of the boot without touching the boot toe, and STIHL says the best length ends between the top of the boot and the top of the second or third lace hook.

How to size chainsaw chaps: the method

STIHL says its chaps “are measured by overall length from the waist down”, and Labonville and Husqvarna also describe their sizes as an overall length. The calculator compares your belt-to-boot measurement with each table and picks the smallest listed length that is equal to or longer than your measurement. An exact match counts. Husqvarna lists its sizes as length ranges (36–38 and 40–42), so a measurement inside a range matches that size. A measurement that falls between ranges goes to the next size up.

Example with apron chaps and a 34 in outseam:

TableListed lengthsResult for 34 in
STIHL Dynamic 6-Layer Apron Chaps32, 36, 40, 44 inSize 36
Labonville apron chaps28, 32, 36, 40, 44, 48 inLong (36 in)
Husqvarna Functional Apron Chaps36–38, 40–42 in36-38L
Husqvarna Technical Apron Wrap Chaps36–38, 40–42 inSize 36/38
The tables differ here, so the calculator shows a spread of 36–38 in instead of picking a winner.

STIHL’s own sizing guide works differently. It lists an approximate outseam range for each size: size 32 for a 32–36 in outseam, 36 for 36–40 in and 40 for 40–44 in. By that guide, a 34 in outseam points to STIHL size 32. The calculator shows this guide note next to the STIHL result so you can see both readings.

Chainsaw chaps size chart, extra-long and short options

This chainsaw chaps size chart lists every row the calculator uses. Each row was transcribed from the manufacturer’s page on October 12, 2026. One brand’s size label does not mean the same fit in another brand.

Brand and modelStyleSizes (length)Waist as listed
STIHL Dynamic 6-Layer Apron ChapsApron32, 36, 40, 44 inBuckle 30–42 in; optional extender up to 56 in
Labonville Original Safety Apron Chap 850KPApronShort 28, Regular 32, Long 36, X-Long 40, 2X-Long 44, 3X-Long 48 inNot listed
Labonville Fire Resistant Apron ChapApronSame as 850KPNot listed
Labonville Original Safety Wrap Chap W850KPWrapSame as 850KPNot listed
Labonville Extreme Competition Safety Wrap Chap W850CKPWrapSame as 850KPNot listed
Husqvarna Functional Apron ChapsApron36-38L, 40/42Adjustable up to 42 in
Husqvarna Technical Apron Wrap ChapsApron (per page title)Size 36/38, Size 40/42Adjustable up to 42 in
STIHL says its inch sizes are approximate.

Wrap vs apron chaps

The calculator uses each manufacturer’s own style label. Of the tables transcribed here, only Labonville lists wrap chaps. Husqvarna names one model “Apron Wrap”, but its page title calls it apron chaps, so it is grouped with the apron rows. If you choose wrap, the STIHL and Husqvarna lines say no wrap chaps are listed in that source.

Extra-long chainsaw chaps

Labonville labels three lengths as extra-long options: X-Long (40 in), 2X-Long (44 in) and 3X-Long (48 in). The longest STIHL Dynamic size is 44 in, and the longest Husqvarna size is 40/42. If your measurement is longer than every length in a table, the calculator says “No listed length is long enough in this source” and names any extra-long options. It never invents a longer size.

Chainsaw chaps for short people

Labonville is the only source here with a labelled Short option, at 28 in. The shortest STIHL Dynamic size is 32 in, and the shortest Husqvarna size covers 36–38 in. If you measure shorter than a table’s shortest length, the calculator still shows that size, adds the flag “Shorter than the shortest listed length”, and leaves the fit decision to the manufacturer’s chart.

Methodology & sources

  • Selection rule: the smallest listed length that is greater than or equal to your outseam, applied to each brand and model group of the chosen style.
  • Rounding and units: inputs are rounded to one decimal place. Centimeters are converted using 1 in = 2.54 cm exactly, then rounded to 0.1 in before comparing. Listed lengths are shown in inches, as printed.
  • Waist: checked only against a waist range the manufacturer prints. Otherwise the result says the table does not use waist.
  • Disagreements: when the tables give different lengths, the calculator shows each result and the minimum-to-maximum spread. It does not average them or pick a winner.
  • Citations: every result in the calculator links to the manufacturer page or pages it was transcribed from, with the transcription date. The two Labonville apron models share one table, as do the two Labonville wrap models, so those results link both pages.
  • Diagram: the measuring diagram beside the inputs is original. Its measuring points follow the STIHL, Labonville and Husqvarna wording quoted above.
  • STIHL USA: STIHL Chaps Guide (transcribed 2026-10-12)
  • STIHL USA: Dynamic 6-Layer Apron Chaps (2026-10-12)
  • Labonville: Original Safety Apron Chap 850KP (2026-10-12)
  • Labonville: Original Safety Wrap Chap W850KP (2026-10-12)
  • Labonville: Extreme Competition Safety Wrap Chap W850CKP (2026-10-12)
  • Labonville: Fire Resistant Apron Chap (2026-10-12)
  • Husqvarna: Functional Apron Chainsaw Chaps (2026-10-12)
  • Husqvarna: Technical Apron Wrap Chainsaw Chaps (2026-10-12)
  • Inch: definition (25.4 mm)

Not included: other brands, and STIHL Function Apron chaps (their size chart was not available on the product page). Chainsaw chaps are protective equipment and are not a substitute for training, proper technique and the rest of your protective gear. This tool gives a sizing estimate only, so always confirm the size against the manufacturer’s current chart and instructions before buying or relying on chaps. See also OSHA chainsaw PPE requirements.

Last updated: October 2026

FAQ

How do I measure for chainsaw chaps?

Measure from the top of your belt down to the top of your boot (Labonville says the top of your foot; Husqvarna says waist to ankle). STIHL says the best length is between the top of the boot and the top of the second or third lace hook, covering the boot top without touching the toe.

What if my measurement falls between two sizes?

The calculator picks the smallest listed length that is at least as long as your measurement, and an exact match counts. Husqvarna sizes are length ranges, so a measurement inside a range matches that size.

Are there extra-long chainsaw chaps?

Labonville lists X-Long (40 in), 2X-Long (44 in) and 3X-Long (48 in) options. STIHL’s Dynamic 6-Layer Apron Chaps go up to 44 in and Husqvarna’s listed apron chaps up to the 40/42 size. If your measurement is longer than every listed length, the tool says so rather than inventing a size.

Are there chainsaw chaps for short people?

Of the tables used here, only Labonville lists a Short option, at 28 in. The shortest STIHL Dynamic size is 32 in and the shortest Husqvarna size covers 36–38 in; the tool flags when you measure shorter than a table’s shortest length.

Does waist size matter for chainsaw chaps?

Only where the maker lists a waist range. STIHL says the Dynamic 6-Layer Apron Chaps buckle adjusts from 30 to 42 in, with an optional extender for waists up to 56 in; Husqvarna lists an adjustable waist up to 42 in; Labonville gives no waist range.

Related guides

  • OSHA Chainsaw PPE Requirements: What the Rules Say You Must Wear
  • How to Measure a Chainsaw Chain: Pitch, Gauge and Drive Links
  • Best Corded Chainsaws for Firewood
  • Are Battery Chainsaws as Powerful as Gas? Cutting Speed and Torque Compared
  • EGO vs Milwaukee Chainsaw: Power, Runtime and Platform Value
  • How to Store Chainsaw Batteries in Winter to Protect Capacity

More free tools

Battery Chainsaw Runtime Estimator

Estimate battery chainsaw runtime from battery voltage, amp-hours, rated watts and duty cycle, with an optional corded-saw energy comparison.

Battery vs Gas Chainsaw Cost-of-Ownership Calculator

Compare the total cost of a gas and a battery chainsaw over the years with your own fuel, power and usage numbers, and find the break-even point.

Chainsaw Bar, Chain & Sprocket Fitment Chart

Look up bar lengths, chain pitch, gauge, drive links and sprocket for listed Husqvarna and STIHL saws, or find saws by pitch and gauge.

See all free tools (9) →

  • Home
  • About Us
  • Contact Us
  • HTML SITEMAP
  • Privacy Policy
  • Terms of Service
  • Affiliate Disclaimer
  • How We Research

Please keep in mind that we may receive commissions when you click our links and make purchases. However, this does not sway our reviews and comparisons. We try our best to keep things unbiased, in order to help you make the best choice. As Amazon Associate, we earn from qualifying purchases.

© 2026 ChainsawGo | All Rights Reserved.

Scroll to top
  • Home
  • About Us
    • Contact Us
  • Cordless Chainsaws
  • Gas Chainsaws
  • Chainsaw Parts
  • Safety Gear
  • Chains & Bars
  • Free Tools
Search