15 Best Chainsaw Rim Sprockets for 2026

15 Best Chainsaw Rim Sprockets for 2026
You’ll find the right chainsaw rim sprocket by matching four things: chain pitch, tooth count, spline design, and bore size. Our 15 picks cover Stihl, Husqvarna, and multi-brand saws, from Mtanlo’s 3/8″ 7T rims to AUMEL’s .325″ mini 7-spline kits.
You shouldn’t guess, because standard and mini splines don’t interchange. Measure your original rim first, then confirm your exact saw model. Keep going, and you’ll uncover more fitment tips that protect your chain and clutch.
More Details on Our Top Picks
Mtanlo Rim Sprocket 3/8 7T for Stihl Chainsaws (68210)
If you run a Stihl MS660 or MS461, the Mtanlo 7T rim sprocket is the top overall pick. You get a five-pack of 3/8-inch pitch, 7-tooth sprockets, so you’ve got spares ready when one wears out. The standard 7-spline design measures 0.89 inches inside and 1.376 inches outside diameter. It replaces part number 0000 642 1223 (reference 68210).
You can also fit it on the MS650, MS661, MS460, 064, 066, and 046 saws. Related fitment references include the 036QS and 046 Pro. Don’t skip the check: compare dimensions and design against your original part before you place your order.
- Pitch:3/8″
- Tooth Count:7T
- Kit Type:Rim only
- Compatible Brands:Stihl
- Compatible Models:MS660, 066, MS650, 064, MS661, MS460, 046, MS461
- Package Quantity:5 rims
- Additional Feature:Standard 7-spline design
- Additional Feature:0.89″ inner diameter
- Additional Feature:1.376″ outer diameter
AUMEL .325″ 7T Chainsaw Sprocket Rim Kit for Stihl (3-Pack)
Stihl owners will find unmatched value in this three-rim pack, built for .325″ 7T setups. The AUMEL kit, model AMLZ00662, replaces Oregon 34162X and Stihl part number 0000 642 1240. Each rim has 7 teeth, a .325-inch pitch, a 17 mm inner diameter, and a mini 7-spline design. You can pair it with 3/8-inch Picco chain setups.
You’ll mount each rim on the clutch drum, where it drives the chain and transfers engine power. You’ll get smooth chain movement with less wear.
It fits many Stihl models, including MS260 and MS390. Installation’s straightforward, and you won’t need complicated tools.
- Pitch:.325″
- Tooth Count:7T
- Kit Type:Rim only
- Compatible Brands:Stihl
- Compatible Models:026, 029, 034, 036, 039, MS260, MS261, MS290, MS310, MS360, MS390
- Package Quantity:3 rims
- Additional Feature:Mini 7-spline design
- Additional Feature:17 mm inner diameter
- Additional Feature:Tool-free straightforward replacement
6Pc Chainsaw Sprocket Rim Kit for Husqvarna/Stihl
Owners of multiple saws will find this kit the most versatile option for 2027. You get six replacement sprocket rims that fit Husqvarna, Stihl, and other compatible two-stroke chainsaws, and they’re intended to replace select Oregon parts.
The kit covers three pitches. You’ll find .325-inch 7T and 8T rims, 3/8-inch 8T and 7T standard rims, a 3/8-inch 7T mini rim with a 7-spline design, and a .404-inch 7T rim. Manufacturers machine-inspect each rim for consistent construction, and you won’t worry about breakage because the durable materials resist it. You can also carry the set easily to any job site.
- Pitch:Mixed (.325″, 3/8″, .404″)
- Tooth Count:Mixed (7T and 8T)
- Kit Type:Rim only (assorted set)
- Compatible Brands:Husqvarna, Stihl, others
- Package Quantity:6 rims
- Additional Feature:Mixed pitch variety
- Additional Feature:Machine-inspected construction
- Additional Feature:Breakage-resistant, portable design
Adefol 3/8″ Pitch 10 Tooth Chainsaw Rim Sprocket
Many 3/8″ pitch saws need a specialty fit, and this Adefol 10-tooth rim sprocket delivers one. You’ll get a 3/8-inch pitch, 10 teeth, a standard 7-spline configuration, a 22 mm inner hole, and a 2-inch outer diameter.
Adefol designed this sprocket to match original dimensions, so you can replace worn parts on compatible Husqvarna, Stihl, Oregon, Husky, and other select chainsaws. Because the sizing is precise, you’ll find installation straightforward.
The package includes one Adefol rim sprocket. Before you buy, check your saw’s model against the listed specifications, since this sprocket fits only select models rather than every chainsaw.
- Pitch:3/8″
- Tooth Count:10T
- Kit Type:Rim only
- Compatible Brands:Husqvarna, Stihl, Husky, others
- Package Quantity:1 rim
- Additional Feature:22 mm inner hole
- Additional Feature:2-inch outer diameter
- Additional Feature:Matches original dimensions
Mtanlo 3/8 7T Sprocket Rim for Husqvarna Chainsaws
If you run a Husqvarna, Mtanlo’s 3/8 7T sprocket rim is the natural fit. You get three rims per package, so you’ll have spares for future swaps. The rim features a standard 7-spline and measures 22 mm.
You can fit it to the Husqvarna 357, 357EPA, 357XP, 359, 359EPA, 362, 365, 371, 372, 380, 385XP, 390XP, and 390XPW. If you’re hunting for a 359 sprocket, a 362 chain-drive sprocket, or 365 and 372 sprockets, this rim covers those needs. You can also cross-reference it with the Makita .375 sprocket, reference 026-224-010. Check your saw’s model against the list above.
- Pitch:3/8″
- Tooth Count:7T
- Kit Type:Rim only
- Compatible Brands:Husqvarna
- Compatible Models:Husqvarna 357, 359, 362, 365, 371, 372, 380, 385XP, 390XP
- Package Quantity:3 rims
- Additional Feature:22 mm inner hole
- Additional Feature:Standard 7-spline design
- Additional Feature:Makita .375 cross-reference
3/8″-7 Clutch Drum Rim Sprocket for Husqvarna Chainsaws (2-Pack)
These 3/8″-7 rim sprockets give you a standout multi-brand fit across Husqvarna, Stihl, and Olympic saws. You’ll cover Husqvarna models such as the 266, 272, 365, and 372, Stihl saws like the 044, MS362, and MS460, and Olympic units including the 281 and 481.
The two-pack comes from Hao Yuan Star (model 3/8-7) in brown, so you’ll have a spare ready for your next swap.
Check your clutch drum. These rims have a 19 mm inner hole, and they won’t fit 17 mm holes. Compare dimensions before you order, so you don’t buy parts that won’t fit your saw.
- Pitch:3/8″
- Tooth Count:7T
- Kit Type:Rim only
- Compatible Brands:Husqvarna, Stihl, Olympic
- Compatible Models:Husqvarna 362, 365, 372; Stihl 046, 066, MS460, MS660; Olympic 260-482 (and others)
- Package Quantity:2 rims
- Additional Feature:19 mm inner hole
- Additional Feature:Not for 17 mm holes
- Additional Feature:Olympic saw compatibility
Mtanlo 3/8″-7T Clutch Sprocket Drum for Husqvarna Chainsaws
Your Husqvarna deserves a complete swap, and Mtanlo’s 3/8″-7T kit is the top Husqvarna kit for it. You get a clutch drum, a rim sprocket, and a clutch bearing in one package, so you won’t hunt for separate parts.
The replacement part number is 578 09 79-01, so you can match it against your old drum quickly. You can fit it on Husqvarna 340, 345, 346, 350, 351, 353, 445, and 450 chainsaws. The listing also names the 346 XP and 450 E. Confirm your model against the full list before you order, since you’ll need an exact fit.
- Pitch:3/8″
- Tooth Count:7T
- Kit Type:Drum, rim, and bearing kit
- Compatible Brands:Husqvarna
- Compatible Models:Husqvarna 340, 345, 346, 350, 351, 353, 445, 450
- Package Quantity:3 pieces (drum, rim, bearing)
- Additional Feature:Includes clutch bearing
- Additional Feature:Includes clutch drum
- Additional Feature:Part number 578 09 79-01
Mtanlo 325″ Rim Sprocket Kit for Stihl 025 MS250 MS251 MS230 Chainsaw Part
The Mtanlo 0.325″ Rim Sprocket Kit suits owners of small Stihl saws like the MS250, MS251, and MS230. It also fits other two-stroke Stihl models, including the 017, MS170, 018, MS180, 021, MS210, 023, 025, MS231, and MS241.
You’ll get a 7-tooth sprocket with 0.325″ pitch, so you can’t use it with chains of any other pitch. The kit includes a clutch drum, rim sprocket, worm gear, needle bearing, clutch washer, and E-clip, so you don’t need to source extra pieces.
Check your saw’s current part against the replacement numbers 1123-007-1032, 1143-007-1003, or 1143-640-2002 before you order this kit.
- Pitch:.325″
- Tooth Count:7T
- Kit Type:Drum and rim kit with hardware
- Compatible Brands:Stihl
- Compatible Models:Stihl 017, 018, 021, 023, 025, MS170-MS251 series
- Package Quantity:6 pieces (drum, rim, worm gear, bearing, washer, E-clip)
- Additional Feature:Includes worm gear
- Additional Feature:Includes needle bearing
- Additional Feature:Includes clutch washer/E-clip
HAISHINE 3/8-8T Rim Sprocket for Stihl MS650 MS660 MS440 MS441 MS461 22273
A hardened steel build gives this HAISHINE 8-tooth rim sprocket serious staying power, so it’s ideal if you run a Stihl or Husqvarna saw hard and hate replacing worn parts. It’s a direct replacement for worn clutch drum spur sprockets on Stihl MS440, MS441, MS461, MS650, and MS660.
This 3/8-inch pitch sprocket uses 7-spline SD7 fitment and replaces Oregon 22273, Stihl 0000 642 1216, and Husqvarna 505303661. Its eight teeth increase chain speed compared with a 7-tooth sprocket, and the hardened steel helps reduce chain wear. Before you order, verify the 22 mm inner hole and standard 7-spline fitment.
- Pitch:3/8″
- Tooth Count:8T
- Kit Type:Rim only
- Compatible Brands:Stihl, Husqvarna
- Compatible Models:Stihl 044, 046, 064, 066, MS440, MS441, MS460, MS461, MS650, MS660; Husqvarna 362, 365, 372 (and others)
- Package Quantity:1 rim
- Additional Feature:Hardened steel construction
- Additional Feature:Faster chain speed
- Additional Feature:Replaces Oregon 22273
Haishine .404″ 7T Rim Sprocket Kit for Stihl Chainsaws
If you’re running a big Stihl, the Haishine .404″ 7T rim sprocket is a top-tier heavy-duty fix. This model B0005 kit fits the Stihl MS661, MS660, 066, MS650, MS640, 064, 070, 090, and 088 chainsaws. It replaces Stihl part numbers 0000 642 1206, 0000 642 1205, and 0000 642 1207, plus Oregon 22270.
You get one .404″ 7-tooth rim sprocket, and the swap is straightforward, so maintenance stays simple. Haishine backs it with lifetime customer service, and you’ll get answers to product questions within 24 hours. This support makes it an easy pick if you want a dependable replacement.
- Pitch:.404″
- Tooth Count:7T
- Kit Type:Rim only
- Compatible Brands:Stihl
- Compatible Models:MS661, MS660, 066, MS650, MS640, 064, 070, 090, 088
- Package Quantity:1 rim
- Additional Feature:Replaces multiple Stihl numbers
- Additional Feature:Lifetime customer service
- Additional Feature:24-hour question replies
GoaMotors 3/8″ 7T Clutch Drum Sprocket Kit for Stihl Chainsaws
Stihl MS290, MS390, and MS310 owners won’t find a more complete kit than this GoaMotors set. You get a 3/8″ pitch, 7-tooth sprocket rim paired with a clutch drum, clutch, needle bearing, washer, and E-clip, so you won’t hunt for separate parts.
The 22 mm inner hole fits the clutch assembly on these saws. Before you order, compare your existing part with the product image to confirm fitment, because the kit only suits the listed models. If you’re replacing a worn rim and a failing bearing at the same time, you’ll save time and finish the repair in one step.
- Pitch:3/8″
- Tooth Count:7T
- Kit Type:Drum and rim kit with bearing and hardware
- Compatible Brands:Stihl
- Compatible Models:MS290, MS310, MS390
- Package Quantity:6 pieces (drum, clutch, bearing, rim, washer, E-clip)
- Additional Feature:22 mm inner hole
- Additional Feature:Includes needle bearing
- Additional Feature:Includes clutch/washer/E-clip
Yutacorex Clutch Drum Sprocket Kit for Husqvarna Chainsaws (513470X)
Owners of Husqvarna 455 or 460 saws get the top two-piece design here, since you’ll swap the worn rim and keep the drum. The Yutacorex 513470X fits the 455, 455 Rancher, 460, and 460 Rancher, and it replaces Oregon 513470X and 513470. You can replace the rim multiple times before you need a whole new unit, which cuts your long-term cost.
You get a 3/8″ pitch, 7-tooth sprocket with a small 7-spline fit. It’s designed to keep your chain aligned with the bar groove and extend operational life. Confirm your spline size before ordering, because larger-spline drums won’t fit.
- Pitch:3/8″
- Tooth Count:7T
- Kit Type:Drum and rim kit (two-piece)
- Compatible Brands:Husqvarna
- Compatible Models:Husqvarna 455, 455 Rancher, 460, 460 Rancher
- Package Quantity:1 kit (drum and rim)
- Additional Feature:Two-piece replaceable-rim design
- Additional Feature:Small 7-spline size
- Additional Feature:Supports bar groove alignment
3-Piece Clutch Drum Sprocket Rim for STIHL Chainsaws
For crews running several saws, this HAISHINE three-piece set is the budget multipack to beat. You get three clutch drum rim sprockets in one lot, so you can swap a worn rim without waiting on a reorder. Model L1975 uses a .325-inch pitch, 7-tooth design with a mini 7-spline and a 17 mm hole. You can fit it to STIHL MS250, MS260, MS261, MS270, MS280, MS290, MS310, and MS390 saws, plus the 026, 028, 029, 034, 036, and 039. Check your saw’s exact model against that list and your chain’s pitch before ordering, since a mismatch won’t fit properly.
- Pitch:.325″
- Tooth Count:7T
- Kit Type:Rim only
- Compatible Brands:Stihl
- Compatible Models:MS250, MS260, MS261, MS270, MS280, MS290, MS310, MS390; 026, 028, 029, 034, 036, 039
- Package Quantity:3 rims
- Additional Feature:Mini 7-spline design
- Additional Feature:17 mm hole
- Additional Feature:Broad Stihl model coverage
Mtanlo 3/8″-7T Rim Sprocket Kit for Chainsaws
The Mtanlo 3/8″-7T rim sprocket kit fits niche saws like the Jonsered CS 2255 and Redmax GZ550, where replacement parts can be hard to find. You get a 3/8″ pitch rim sprocket with 7 teeth, plus everything around it: one clutch drum, one clutch assembly, one needle bearing, and two oil lines. That bundle saves you from hunting down separate parts when you’re rebuilding a worn clutch.
Before you buy, compare each component with your original parts to confirm fitment. You’ll avoid returns and wasted time. Mtanlo’s kit won’t suit every saw, so check your model carefully before installing.
- Pitch:3/8″
- Tooth Count:7T
- Kit Type:Drum and rim kit with oil lines and bearing
- Compatible Brands:Jonsered, Redmax
- Compatible Models:Jonsered CS 2255; Redmax GZ550
- Package Quantity:6 pieces (drum, rim, 2 oil lines, bearing, clutch)
- Additional Feature:Includes two oil lines
- Additional Feature:Includes clutch assembly
- Additional Feature:Jonsered/Redmax fitment
Adefol 6pcs Sprocket Drive Rim for Chainsaw (.325″ 7T)
If you run multiple saws, Adefol’s 6-piece rim kit is the smartest bulk pick.
Each rim has a .325-inch pitch, seven teeth, a 19 mm inner diameter, and a 32 mm outer diameter. You’ll get a standard 7-spline ring chain wheel.
It fits Stihl models like the 026, MS260, MS290, and MS390, plus Husqvarna 550XP, 357XP, 346XP, and 262XP. You’ll also find matches for select Jonsered, Poulan, and Dolmar saws.
Match part numbers like Oregon 11892 before buying. The ring design reduces chain wear and stress for smoother cutting. Confirm the count; the listing mentions both six and ten.
- Pitch:.325″
- Tooth Count:7T
- Kit Type:Rim only
- Compatible Brands:Stihl, Husqvarna, Jonsered, Poulan, Dolmar
- Compatible Models:Stihl 024, 026, 029, 034, 036, 039, MS250-MS390; Husqvarna 340, 346XP, 550XP (and others)
- Package Quantity:6 rims per title (details say 10)
- Additional Feature:19 mm inner diameter
- Additional Feature:32 mm outer diameter
- Additional Feature:Reduces chain wear/stress
Factors to Consider When Choosing Chainsaw Rim Sprockets**
Factors to Consider When Choosing Chainsaw Rim Sprockets**
Even a well-made rim sprocket won’t help you if it doesn’t match your saw, so you’ll want to check a few key specs before you buy. You need to confirm chain pitch compatibility, sprocket tooth count, spline type and fit, inner diameter measurements, and saw model compatibility. Here’s how each factor affects your saw’s performance and how you can verify it.
Chain Pitch Compatibility
Before you buy a rim sprocket, check your chain’s pitch, because the sprocket has to match it exactly. A 3/8-inch sprocket fits only a 3/8-inch chain, and a .325-inch sprocket fits only a .325-inch chain. If the pitch is wrong, the chain won’t engage properly.
Don’t assume two sprockets are interchangeable just because they share a tooth count. Pitch is a separate specification, so a 3/8-inch 7T and a .325-inch 7T aren’t the same part.
Watch for 3/8-inch Picco setups, too. Don’t rely on the 3/8-inch label alone; verify that your chain and sprocket specify the same pitch type.
If you’re buying a kit with multiple pitches, use only the rim that matches the chain you’re fitting. Set the others aside to avoid mismatches.
Sprocket Tooth Count
Pitch tells you which sprockets fit your chain, but tooth count tells you how the saw will run. Tooth count sets how far the chain travels with each sprocket rotation. More teeth generally increase chain speed, while fewer teeth generally deliver more drive force.
You’ll commonly find 7-, 8-, and 10-tooth rim sprockets, but the right count depends on your saw’s intended setup. Even a single tooth matters: an 8-tooth sprocket drives the chain faster than a 7-tooth one. Always consider tooth count alongside chain pitch, because the teeth must engage your chain correctly.
When you replace a sprocket, match the tooth count to your original or to the saw manufacturer’s specified setup. Don’t pick a different count just because you want more speed.
Spline Type and Fit
Spline type and fit decide whether a rim sprocket physically mounts to your clutch drum, so you can’t treat them as an afterthought.
Match the sprocket’s spline design to your clutch drum. A standard 7-spline rim and a mini 7-spline rim aren’t interchangeable, even though both have seven splines. The profile matters, not just the count.
Don’t assume that matching pitch and tooth count guarantees fit. Spline configuration and bore size must match too.
Before you order, compare the replacement rim’s dimensions and spline profile with your original part. Once it arrives, confirm the rim seats securely on the drum. It shouldn’t feel loose, bind, or sit misaligned. Any wobble or resistance signals a mismatch, and running it risks damaging the drum and sprocket.
Inner Diameter Measurements
Even with the spline profile confirmed, you still need to check the sprocket’s inner diameter, which is the hole that slides over the clutch drum or hub. Measure that opening directly; don’t rely on pitch or tooth count. A rim sprocket with a 17 mm inner diameter may not fit a hub built for a 19 mm or 22 mm opening.
Some 3/8-inch, 7-tooth sprockets list an inner diameter of 0.89 inch, or about 22.6 mm, so verify the stated measurement against the actual fit.
Use calipers to measure your original sprocket’s opening. Keep the tool centered, and avoid worn or damaged edges, since they’ll skew your reading. Match the replacement’s inner diameter and spline design to the original; diameter alone doesn’t confirm fit.
Saw Model Compatibility
Once you’ve checked the inner diameter, you’ll need to confirm that the sprocket matches your exact chainsaw model, because compatibility can differ even among closely related saws. Start with chain pitch and tooth count. Your saw requires specific values, and you can’t swap a 3/8-inch-pitch, 7-tooth sprocket for a .325-inch-pitch, 7-tooth sprocket, even though the tooth counts match.
Next, confirm the spline configuration and size. Sprockets use either standard or mini 7-spline designs, so you’ll want to match yours to the original. Compare the inner-hole diameter with your original part, too. Common sizes include 17 mm, 19 mm, and 22 mm. Finally, verify fitment against your saw’s model-specific part number and the original sprocket’s dimensions before you order. That quick check prevents costly returns.
Material and Durability
Because your sprocket takes the full force of the chain on every pass, material matters as much as fit. Hardened steel construction withstands repeated chain contact, so you’ll get a rim that’s built to resist wear. Durable materials also hold the tooth shape your chain needs to engage reliably, which keeps the cut consistent.
Don’t ignore wear, though. Worn or damaged teeth increase friction and speed up chain wear, so you should inspect your sprocket regularly and replace it once you see deterioration.
Consider a replaceable rim, too. You’ll swap only the worn contact part instead of the entire clutch-drum assembly, which saves you money. Finally, look for machine-inspected construction. It helps guarantee consistent dimensions and lowers the risk that your sprocket breaks prematurely.
Frequently Asked Questions
How Often Should I Replace My Chainsaw Rim Sprocket?
You’ll want to replace your rim sprocket after every two to three chains, or every 100 hours of use. If you notice uneven wear, deep grooves, or chain slipping, you shouldn’t wait; swap it immediately.
Can I Install a Rim Sprocket Without Special Tools?
Can I Install a Rim Sprocket Without Special Tools?
Yes, you can swap a rim sprocket with basic hand tools. You’ll need a scrench, a flathead screwdriver, and a rag. You’ll remove the bar cover, slip off the chain, and then pull the clutch.
Should I Replace the Chain When Changing the Sprocket?
Yes, you should replace the chain when you’re changing the sprocket. A worn chain wrecks a new sprocket quickly, and you’ll lose cutting performance. Don’t mix old and new parts if you want them lasting.
How Do I Tell When a Rim Sprocket Is Worn Out?
You’ll know a rim sprocket’s worn out when you see deep grooves or notches in the drive surfaces. You’ll also notice chain slack, vibration, or uneven cutting. Replace it soon, before it damages your chain.
Does Regular Lubrication Extend the Life of a Rim Sprocket?
Yes, you’ll extend your rim sprocket’s life by lubricating it regularly. Grease the bearing before each use and keep your chain oiled. You’ll cut friction and excess heat, so you won’t replace it as often.
Conclusion
Choosing the right chainsaw rim sprocket doesn’t have to be complicated. You’ve seen options for Stihl and Husqvarna saws, in 3/8″ and .325″ pitches, with tooth counts that suit your cutting needs. Match the pitch and tooth count to your chain and bar, and you’ll get smoother cuts and longer chain life. Pick a kit that fits your saw, replace worn sprockets promptly, and you’ll keep your chainsaw running strong for years.





















